Home Improvement Knowledge

Process of a Synthetic Turf Installer

If you are planning to install a synthetic turf field, here are a few tips to make it easier. Once you are ready to begin, follow these steps:

Navigate through the article:

Seam tape

Glue and seam tape are two essential tools in installing synthetic grass. To use seam tape, you should lay the grass with the filaments away from the seam line first. Glue should then be applied over the grass’s seam line.

Make sure to spread the glue evenly. The seam should be kept thin, as it can come up through the grass if it is too thick. Follow the instructions on the seam tape for application and apply them to the grass seams.

The first step to a successful seam installation is to inspect the synthetic grass. This is not to identify a defective piece of grass, but rather to determine the amount of backing to cut away from the scrim. Click here for more information about scrim.

Generally speaking, the backing of synthetic turf becomes thicker after a few gauges away. Use a utility knife to cut the seams to the appropriate size. Once seams are installed, it should be difficult to notice them.

When applying artificial grass seams, seam tape is used to cover the gap between the strips. It comes in rolls that are 33 feet long and 6 inches wide. It adheres to the seams easily without messy glue fingers. It also provides a durable seam.

The seam tape used in synthetic grass installation is easily available in rolls and lineal feet. It can also be applied manually. When using seam tape, make sure the seam is even.

Ground drainage

During synthetic turf installation, it is essential to consider ground drainage. If the area is located on a sloped surface, a drainage grate or rubber shock pad should be installed under the synthetic grass before installation. This will prevent undulating or deforming of the grass and maintain the look of the field for longer.

If the area is not sloped, however, this step can be skipped. To solve the drainage issue, a reputable installer will install a drain tile to make sure the grass is protected.

In addition to the drainage issues, ground should slope away from the building. It should also be lower than the weep screed, which is the building material used along the base of a stucco wall. If the turf is placed higher than the weep screed, it could result in water penetrating the wall. A positive slope is needed for the turf to drain, so water can exit the area.


If you have a yard that needs a new lawn, you may be wondering how to install synthetic turf. The process involves removing the existing surface, installing a sloping base, and applying a geotextile weed suppressant. Then you apply an infill material such as rubber crumbs, sand, or a combination of both. The cost of installing synthetic turf will vary depending on the type of turf you choose.

The cost of installing synthetic grass can vary depending on the season. Artificial grass is cheaper during the winter months, when the demand for lawns decreases and fewer people are looking for professional installers.

Artificial grass costs vary considerably, but the average cost for a full turn-key installation ranges from $8.00 per square foot. The exact amount you pay will depend on the materials you choose and the total area you need covered. You can shop here to find out more about pricing and available materials. You can also do an online consult for additional help.

You’ll also need to consider the terrain and the nature of the surface. To find out how much artificial grass will cost you, contact a local service provider today. Once you have a clear idea of the cost, you can begin shopping for artificial grass.

DIY option

Whether you’re installing a new playground, putting down a new lawn, or transforming an old one, there are some do-it-yourself options for installing synthetic turf.

To begin, you’ll need to remove your current lawn. Unless you’ve hired a professional, it is possible to do this task yourself if you have the proper tools and follow instructions.

Start by measuring the space where you want the turf to go. Next, cut pieces to size. Click the link: https://en.wikipedia.org/wiki/Artificial_turf for more information about artificial grass. Ideally, you’ll leave a couple of inches of extra grass on the edges to tuck under border lines and against walkways.

You can use landscape staples and nails to secure the extra grass. You can also use a knee-kicker or drop spreader to stretch the grass and apply the infill material.

However, be aware that you’ll be creating a substantial amount of debris in your yard if you choose to install synthetic grass yourself. Therefore, you may want to hire someone to do it for you if you’re unsure of your DIY skills.

Join The Discussion